This is the computer system I made for Mark

I got my information from a link on Toms hardware page. It points to a Japanese page. The page is from www.kikumaru.com. One is in Japanese, and the other 2 are in English. Below are links to the actual pages. I did make one modification to what kikumaru said to do. I did all the soldering and drilling on both chips. Both of them are identical. This is the only thing that I did different from the kikumaru page.

English version #1, English version #2, and the Japanese version.

If you would like benchmarks click here.

Now for pictures on what I actually did for Mark.

Below is the front of the 300a Celeron chip.

This proves the 300a

Below is the back of the CPU.

This is the back without the heat sink.

This it the front without the heat sink

Here is the Video card I used. Asus TNT

Below is the I drilled can you find it?

Here is a small picture of the Motherboard

This is the slot one card edge.

This is the resistor that got soldered on to from the above picture.

This is where the two previous solder joints meet.

Now we have it all together and running here is the BIOS off the monitor. Notice the 2 Processors detected.

This is the NT screen with it booting

Look for the 2 system Processors.

And here is the system with the Windows NT on it, this is the part I really like!

This is the end.